BRITE
LITES RESTORER
INSTRUCTIONS FOR USE:
We recommend that you do this application out of direct sunlight.
Step 1 – GEL CLEANER
Apply the GEL CLEANER to the entire lens using the scrubby sponge.
ALLOW IT TO REMAIN ON THE LENS FOR 1-2 MINUTES TO ALLOW IT TO WORK
COMPLETELY. The gel helps keep it on the lens. After the gel has been
on for the allotted time, scrub the lens with the abrasive sponge.
Then, thoroughly rinse all the loosened grime off with water. Dry
the lens. If you notice any areas that you missed cleaning with the
GEL CLEANER, reapply to those areas and follow the above instructions.
Step 2 – RESTORER
Apply the RESTORER to the lens and polish the lens vigorously using
pressure and the soft side of the sponge for several minutes. The
more time spent on polishing, the better the final clarity of the
lens will be. Remove any excess with water and a damp rag. This step
may be repeated to improve the appearance.
Step 3 – SEALER
Now that the lens is cleaned and the clarity is restored, its time
to protect your work. Apply the SEALER to the entire lens with a clean
cloth. Let it dry and buff the surface with a clean dry cloth. This
step may be repeated for additional protection.
|
